Various needle tip styles have been developed for a range of applications to satisfy customer preferences. Other styles can be produced on request.
| Application / Description | Recommended Needle "SGE Code" |
 | |
| GC Autosampler The cone shape needle has been specifically developed to withstand the multi injection demands of Autosamplers. They are also standard on microvolume and valve syringes. | Cone needle tip - (Style #1) "C"
|
| |
| Manual GC A 20° bevel tip is the standard general purpose needle tip style supplied with SGE syringes. This style is designed for optimum septum penetration and prevention of septum coring. | Bevel needle tip - (Style #2) "BV"
|
| |
| Manual GC The same as the bevel tip, except a 0.7mm OD reinforcing sheath is silver soldered over the standard needle to within 10mm of the tip. The sheath provides exceptional strength to the needle. | Sheathed/Bevel needle tip - (Style #4) "T"
|
| |
| HPLC HPLC valve injection syringes have 90° square tip needles with chamfered and polished edges to eliminate damage to the valve's rotor seal and stator face. This needle tip is also suitable for the pipetting of liquids. | HPLC needle tip - (Style #3) "LC"
|
| |
| Large Volume Injection Liquid samples are filled and dispensed through the side hole. The solid domed tip minimizes septum damage. | Side hole domed needle tip - (Style #5) "H"
|
| |
| Biological This style needle is recommended for use with pre-drilled septa. The tip is rounded and polished to facilitate septum penetration. | Domed needle tip - (Style #6) "D"
|
| |
| TLC/Gel Spot Plating The needle has a 90° square tip and a 20mm long film of PTFE coated over the tip. Ideal for dispensing aqueous samples without wetting the outside of the needle. | PTFE coated needle tip - (Style #7) "P"
|
